Single Door Access Control System
today is faced with an increasing need to control access to an ever-expanding
variety of unsecured locations. Be it for the security of employees,
the protection of assets or the implied threat of lawsuits, access
to areas such as computer rooms, labs, storage facilities, accounting
departments, wash rooms and executive offices is now a must.
up to now, the high cost of an integrated access control system has
put these areas beyond the reach of most companies' budgets.
Introducing Servant. The
straightforward, affordable solution to access control. Now you
can offer your customers the security and convenience of keyless entry,
combined with many of the features found only in costly and complex
Servant AC series installation
is a complete, stand alone single door access control solution to
your customers needs
The servant access control systems c/w
the following features:
Runs 12 VDC from AC/DC adapter
or backup power supply.
2 System Codes
4-digit codes, programmable from the
99 Individual Users
Every user has unique pin code (AC-1x)
or proximity card (AC-2x).
Three Modes of Operation
All the system codes, user codes or user
cards are acceptable
The bell button can be programmed as
door release button, all other codes and cards are still valid
Only 10 master users can operate the
system, PIN plus Proximity is obtainable in Night mode
Bell and Chime
Built-in bell button (*), Bell and Chime
are obtainable from the optional BL-01.
Integral with tamper switch, the optional
BL-01 gives siren and outputs tamper signal if the cabinet cover is
removed. Siren time is programmable (1 to 9 minutes) from the keypad.
Built-in Electronic Relays
Protected from any electromagnetic device,
max 3.5 Amp
Exchangeable Cabinet Cover
Optional metal cover is available
All the settings are programmable from
the keypad, rewiring is not necessary
Only four-wire connection
Control System Manual (in pdf format; 191kb)